• Auto Dialer for Alarms and Control Panels can sequentially dial up to 4 telephone numbers
• Delivers up to a 16 second message you can record
• 9-12 volt DC operation
• Requires auxiliary contacts on primary alarm or panel
• Weight: 5 lbs
• Width: 6″
• Depth: 4″
• Height: 4″

The post Liberty Pumps ADC-1 Auto Dialer appeared first on LibertyPumpReviews.com.

Rugged and dependable heavy-duty cast iron pump with powder coat finish.
Liberty’s “workhorse” sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options – including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).
With a durable, epoxy powder coat finish and vortex style impeller, Liberty’s 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

Made of cast iron and stainless steel. 10″ W x 11″ H.

The post Liberty Pumps 257 1/3 Horsepower Submersible Pump appeared first on LibertyPumpReviews.com.

The short profile of Liberty’s 404 is specially designed for compact areas and gives you the freedom to install fixtures where gravity drain lines are not available. Our QuickTree® Technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 404 is perfect for laundry tray sinks, bar sinks, washing machines and other basement remodeling projects. The system arrives fully assembled and ready to install. 14″ W x 14″ L x 11″ H. Made of aluminum.

The post Liberty Pumps 404 1/3 Horsepower Residential Short Drain Pump appeared first on LibertyPumpReviews.com.

Features:

• QuickTree™ technology allows easy access and removal of switches without disturbing pump or plumbing.
• Integrated rubber seals permanently attached to cover.
• Unique cord seal technology integrated into the inspection cover.
• Shallow basin design for easier installation in difficult soil/bedrock locations.
• Large 41 gallon capacity for longer pump cycles.
• Integrally molded torque stops secure the pump in its proper position.
• Integrally molded anti-flotation collar.
  • Durable polyethylene construction.
  • Completely assembled.

  Specs:

  • HP: 1/2
  • Volts: 115
  • Phase: 1
  • Discharge: 2
  • Weight: 60 LB.

The post Liberty Pumps P382LE51 1/2 Horsepower Simplex Sewage Systems appeared first on LibertyPumpReviews.com.

Features:

• QuickTree™ technology allows easy access and removal of switches without disturbing pump or plumbing.
• Integrated rubber seals permanently attached to cover.
• Unique cord seal technology integrated into the inspection cover.
• Shallow basin design for easier installation in difficult soil/bedrock locations.
• Large 41 gallon capacity for longer pump cycles.
• Integrally molded torque stops secure the pump in its proper position.
• Integrally molded anti-flotation collar.
  • Durable polyethylene construction.
  • Completely assembled.

  Specs:

  • HP: 4/10
  • Volts: 115
  • Phase: 1
  • Discharge: 2
  • Weight: 60 LB.

The post Liberty Pumps P382LE41 4/10 Horsepower Simplex Sewage Systems appeared first on LibertyPumpReviews.com.

115 or 230 Volt available. Compact tank designs. The LCU-Series Condensate Pumps from Liberty are designed to handle removal of condensate from high efficiency furnaces, A/C equipment, dehumidifiers, ice machines and other applications producing condensate. Model LCU-20S and LCU220S come with a safety switch. All Liberty condensate pumps come with a two year warranty.
LCU-Series Features:

• High impact ABS tank
• Wall mounts
• Three intake holes
• 3/8″ O.D. outlet
• Barbed and threaded discharge connection
• Removeable Check valve
• Stainless steel shaft
• 6′ power cord with ground
• Thermally protected
• Fully automatic
• Quiet operation
• Built in safety switch (LCU-20S, LCU-20ST and LCU220S only)
• Maximum fluid temperature for LCU models: 150 degrees Fahrenheit
• Models ending with a “T” suffix include 20′ of clear 3/8″ tubing

The post Liberty Pumps LCU-20S Condensate Pump 20′ Safety Switch appeared first on LibertyPumpReviews.com.

3/4″ NPT Water Inlet Connection. Accepts 20PSI up to 100PSI inlet supply pressure*
The SumpJet® (Model SJ10) is a water powered back-up sump pump that will protect your basement in the case of a power outage. This unique product is powered by your municipal water supply** and requires no electricity to operate! With a compact high efficiency design, the SumpJet® removes 2 gallons of sump water per 1 gallon used. The SumpJet® is fully automatic, arrives completely assembled, and comes backed with Liberty’s standard 2 year warranty.
*The SJ10 pumping performance varies with inlet water source pressure and pumping head. See complete specifications and performance chart for expected flow rates.
**The SJ10 requires an uninterrupted water source to operate. If you have a well pump, the SJ10 will not operate during power outages.

The post Liberty Pumps SJ10 SumpJet Water Powered Backup Sump Pump appeared first on LibertyPumpReviews.com.

This portable pump is perfect for boosting water pressure, draining hot water tanks and general water transfer. Features include a one-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, a convenient on/off switch, and a powerful 1/2 hp motor capable of pumping over 100 feet of head. Not intended for permanent installations. 5″ W x 10″ L x 7″ H.

The post Liberty Pumps 331 1/2 Horsepower Portable Transfer Pump appeared first on LibertyPumpReviews.com.

Liberty Pumps CV2N1C 1-1/4 OR 1-1/2 Compression Check Valve

• PVC
• Vertical and horizontal installation

Features:

• 125 PSI rated
• Models available – CV125C 1-1/4″, CV150C 1-1/2″, CV200C 2″, CV300C 3″

[DKB url=”” text=”” title=”” type=”” style=”” color=”” height=”” width=”” opennewwindow=”” nofollow=””]

The post Liberty Pumps CV2N1C 1-1/4 OR 1-1/2 Compression Check Valve appeared first on LibertyPumpReviews.com.

Liberty Pumps CV2N1 1-1/4 OR 1-1/2 Compression Check Valve

• ABS valve body
• Rubber slip connection with hose clamps

Features:

• Vertical and horizontal installation
• Models Available – CV2N1 combination 1-1/4″ or 1-1/2″, CV200 2″

[DKB url=”” text=”” title=”” type=”” style=”” color=”” height=”” width=”” opennewwindow=”” nofollow=””]

The post Liberty Pumps CV2N1 1-1/4 OR 1-1/2 Compression Check Valve appeared first on LibertyPumpReviews.com.